Individual Lighting Control

Individual Lighting Control


Applicable for: All the lighting devices

 

Individual Lighting Control is a set of controls used by the user (facility manager) to (control) a specific light device in a workspace(zone). These controls can be used to override the zone rules to meet the present needs of the user. Individual Lighting Control includes light On/Off control, light intensity control, daylight sensor control (if applicable), daylight threshold control (if applicable), HCL CCT control (if applicable).


  1. On/Off Control

To individually turn ON and OFF the light device, follow these steps:

  1. Click on the Map Operations Icon on the left side panel on your dashboard.

  1. Click and select your desired building name > floor name > wing name in which the light device is installed.

  2. On the CAD layout click and select your desired light device icon which needs to be switched On/Off.

  1. Under the left menu simply click on the Light ON/OFF switch to turn ON and OFF the light device respectively.

  2. The light device should turn On/Off in a minute


  1. Intensity Control

To individually control the light intensity, follow these steps:

  1. Click on the Map Operations Icon on the left side panel on the dashboard.

  2. Click and select your desired building name > floor name > wing name in which the light is installed.

  3. On the CAD layout click and select your desired light device icon whose intensity needs to be changed.

  4. On the left menu to change the Light Intensity follow the steps as per steps below.

    1. If present Light Intensity is set to Auto then the light will behave as per the zone rule applied in that zone.

      1. Click on Change to set your preferred individual light intensity level.


      1. Use the slider to set your desired intensity levels.

    1. If present Light Intensity is set to a given percentage use the slider to set your desired intensity level.

    1. If present Light Intensity is set to a given percentage and you want to apply the zone rule click on Clear.

    • Related Articles

    • Adding, Modifying Lighting Rules

      Applicable for: All the lighting devices The lighting rule is a set of controls set by the user (facility manager) to control a specific Lighting workspace (zone). These Lighting rules use various input parameters as part of the decision matrix to ...
    • Emergency Lighting Control

      Applicable for: All the Emergency Lights The Emergency Lighting Control is a set of controls used by the user (facility manager) to (control) an emergency light device on a particular floor of a building. For all emergency lighting devices, a minimum ...
    • Mapping Lighting Zones

      To understand the placement of lighting devices in different zones, the user can view maps of different floors where each device’s geographical location is symbolically represented along with zone boundaries. Users can also gather basic information ...
    • Managing Device Alerts

      To check for malfunctioning devices or to keep track of a disconnected device IQnext manages a list of the disconnected gateway and lighting devices. You can track the status of turning on/off of an individual disconnected device of a building or a ...
    • Managing In-Room Display tablets

      The In-Room Display is a touch screen device dedicated to managing lighting settings in real-time without the need of accessing the platform. To provide flexibility in the operation of these tablets you can change basic details( tablet name, mac ...